The Following Four Phenomena When Braking
Brake pad is an important part of brake system
Braking effect
It depends on the friction resistance between the brake pad and the brake disc
But each group of brake pads has its bearing limit
When it reaches the critical point, it will remind you in its way
01 harsh scream
When braking, if we hear the harsh metal whistling sound, we should pay special attention, because the alarm iron plate on the brake pad has begun to wear the brake disc. We need to go to the service station immediately, and professionals will check the wear condition of the brake pad, and replace the brake pad if necessary.
02 eye-catching indicator
When the brake system fault indicator light is on, it is necessary to enter the station in time. Professionals should check whether the brake pads have been worn to the limit, whether the brake oil level is too low, and whether the ABS sensor is faulty.
03 failure to follow the heart when braking
After the brake pads are seriously worn, the braking distance will become longer (air leakage in the brake pipeline or oil leakage in the brake line will also cause the braking distance to become longer). For the sake of driving safety of you and your family, please go to the service station for inspection and replacement in time to avoid serious accidents.
04 deviation during braking
If everything is normal when the car is driving, but the deviation occurs when stepping on the heavy brake, it is likely that the brake pad is close to the wear limit. This way is being used to remind you that it is time to replace the brake pad immediately.
The above four phenomena are only for daily inspection of brake pads. It is recommended to check every 5000 km during daily maintenance to prevent trouble. At the same time, in daily use, avoid sudden braking or sudden braking, and try to predict and brake smoothly in advance, so as to prolong the service life of brake pads and reduce the wear of brake discs.