Do You Have These Problems With Your Brakes?
When riding, press the brake handle with both hands at the same time or press the brake handle on both sides of the left and right hands in turn to speed up the running in between the disc and the disc. In this way, the handle and braking efficiency of the brake will be better and better.
Factor 1: release agent to make the tablets attached
A thin layer of release agent will be attached to the surface of the new Lai Ling sheet, which is easy to remove from the mold during the manufacturing process.
Cause 2: rust proof oil for discs
The discs are coated with a thin layer of antirust oil after production and before leaving the factory to prevent the discs from rusting after being placed for too long.
One plus two main factors adhere to the release agent to make the disc and the disc coated with antirust oil look like two smooth "mirrors". When braking, it will slip and stop the car.
The third reason is that the contact surface is not running in to the best state
The new car's starter and disc are brand new and undamaged, so the contact surface between them is not in the best state. (if both sides are not running in, the surface structure will fluctuate slightly) which will affect the braking effect. After running in for a period of time, the contact surface between the disc and the guide plate will be smooth, and the braking effect will reach the ideal state.
Suggestions for running in mode: