Brake Accessories Attach To The Vehicle To Slow Down The Target
Brake pad accessories, also known as car brake pads, is fixed in the wheel with the brake drum or brake disc friction material, where the friction lining and friction pads to withstand external pressure, resulting in friction to achieve the vehicle deceleration purpose.
Brake accessories are generally made of steel, adhesive insulation and friction blocks, Accessories Of Brake Pad in which the insulation layer is composed of non-heat transfer material, the purpose is to heat. The friction block is composed of a friction material, a binder, and is braked on the brake disc or brake drum to create a friction, so as to achieve the purpose of vehicle deceleration and braking.
Generally by the steel plate, bonding insulation layer and friction block composition, Accessories Of Brake Pad steel plate to be coated to rust, coating process with SMT-4 furnace temperature tester to detect the temperature distribution of the coating process to ensure quality. The insulation layer is composed of non-heat transfer material, the purpose is to heat. The friction block is composed of friction material, adhesive, Accessories Of Brake Pad brake is squeezed in the brake disc or brake drum on the friction, so as to achieve the purpose of vehicle deceleration brake. Due to friction, the friction block will gradually be worn, in general, the lower the cost of the brake pads wear the faster wear. After the use of friction material to replace the brake pads in time, otherwise the steel plate and the brake disc will be in direct contact, Accessories Of Brake Pad and ultimately lose the braking effect and damage the brake disc.
Brake Accessories:
Brake accessories from the type of accessories are:
- Brake accessories for disc brakes
Second, brake brakes for drum brakes
Three, for the big truck to make the film
From the recipe technical points are: semi-metal, less metal, asbestos, ceramics,
Brake drum is loaded with brake shoes, but most people call the brake pads on the annex to the brake pads accessories and brake shoes, so use the "disc brake accessories" to specify the disc brakes installed brake pads accessories. Not a brake disc.
Brake pad attachment maintenance methods:
Brake shoes commonly known as brake pads accessories, consumables will be used in the gradual wear and tear, when the wear to the limit position, must be replaced, Accessories Of Brake Pad otherwise it will reduce the braking effect, and even cause a security incident. Brake shoes related to life safety, must be treated with caution.
1, under normal driving conditions for each travel 5000 km on the brake shoe check once, not only to check the remaining thickness, but also check the wiper wear state, both sides of the degree of wear is the same, the return is free, etc., found abnormal The situation must be dealt with immediately.
2, the brake shoe is generally composed of iron liner and friction material composed of two parts, must not wait for friction material part of the grinding did not change the shoe. For example, the front brake shoe of the Jetta has a thickness of 14 mm and a replacement thickness of 7 mm, Accessories Of Brake Pad which includes 3 mm of iron liner thickness and nearly 4 mm of friction material thickness. Some vehicles with brake shoes alarm function, once reached the wear limit, the instrument will alarm tips to replace the shoe. Accessories Of Brake Pad To achieve the use of the limit of the shoe must be replaced, even if still can use for some time, will reduce the effect of braking, driving safety.
3, when replacing the original spare parts to provide the brake pads accessories, the only way to make the brake pads and brakes between the brake effect of the best, the smallest wear.
4, the replacement of the shoe must use a special tool to brake the top of the cylinder. Can not use other crowbar hard pressure back, so easy to lead to brake calipers guide the screw bending, so that brake pads attachments stuck.
5, after the replacement, we must step on the foot brake to eliminate the gap between the shoe and brake disc, resulting in the first foot did not brake, prone to accidents.
6, brake shoe replacement, the need to run 200 km to achieve the best braking effect, just change the hoofs to be careful to drive.
How long does it take to replace the brake pads?
Brake accessories are consumables, in use will gradually wear and tear, when the wear to the limit position must be replaced, otherwise it will reduce the braking effect, and even cause a security incident.
Under normal circumstances the front brake shoe wear is relatively fast, after the brake shoe using a relatively long time. In the daily maintenance, Accessories Of Brake Pad it should be noted: normal driving conditions, each driving 5000 km on the brake pads accessories check, not only to check the remaining thickness, but also check the wiper wear state, both sides of the degree of wear is the same, Whether it is comfortable, etc., found that the normal situation must be dealt with immediately, the brakes must not wait part of the friction material are not only replaced. Some vehicles with brake pads accessories alarm function, once reached the wear limit, the instrument will prompt to replace the alarm.
In addition, some consumers like to find a repair shop on the replacement of brake pads. In fact, Accessories Of Brake Pad the replacement of the original spare parts to provide the brake pads accessories, so as to make brake pads and brakes between the brake effect of the best, the smallest wear. Replace the brake shoe with a special tool to return the brake cylinder back. Can not use other crowbar hard pressure back, so easy to lead to brake calipers guide the screw bending, so that brake pads attachments stuck.