繁體版     English

E-mail:susan@brakepad.cn     +86-532-66736778

Welcome

News

Braking Effect Of Brake Pads

[Catalog:News] [Date:2017-7-7] [Hits:] [Return]

Brake pads are familiar to many car owners, although small size, is the active safety system is the most basic and most important parts, but because of the high frequency of use, brake pads are not a small chance of damage. But when you need to replace the brake pads, I'm afraid many car owners may not understand.

In fact, the life of the brake pads is difficult to define with a definite kilometer or time. Because everyone's driving conditions are different, the road is not the same, Brake Pad so the wear of the brake pads are not the same. Some people may need to replace the brake pads 340,000 kilometers, and some people do not need to replace the brake pads 100,000 kilometers.

1 How to determine whether the brake pads need to be replaced?

Remove the new brake pads during the running-in phase, if the brakes are accompanied by a hiss of metal friction, the brake pads must be replaced immediately. This approach may not be very reliable, if the feeling of braking bias or insufficient braking force, there may be a brake pipe and other problems, involving more reasons. So it's best to judge by the naked eye.

Usually, a brand new brake pads thickness is 1. Around 5cm, Brake Pad when the brake pads are observed to be less than 0.5cm, be ready to replace.

Of course, individual models due to the wheel design reasons, in the case of no demolition tires through the naked eye hard to see the brake pads, it is best to regularly go to repair shop Check, the simplest way is to pay attention to the dashboard, when the brake pads indicator steady need to replace the brake pads

2 What kind of brake pads? Does the brake pads need replacing? How to determine if the brake pads need to be replaced?

It is best to replace the brake piece with the original brake pads. Only in this way, the brake pads and brake disc between the best braking effect, wear-resistant performance also reach the best!

Of course, if you want to improve performance, you can choose ceramic brake pads (not really ceramic, is actually synthetic material), of course, the price will be a little more expensive.

Brake pads need to be replaced at the same time, the new brake pads surface, need and brake disc running-in 200 km to achieve the most effect. So be careful driving during this time.

3 Why does the brake pads need to be running-in after replacement?

After the new brake pads are replaced, the brake pads are relatively flat and the contact surface on the brake disc is very uneven. This time, there will be the emergence of the so-called "brake" situation. Therefore, it is necessary to change the new brake pads, so that the contact area between the brake pads and the brake discs is increased and the braking effect is better.

4 new Brake Pads how to do?

Brake Brake Pads After replacement, if the feeling brake is softer, then must step on a few feet to brake, to eliminate the brake pads and brake disc clearance. Brake Pad The need to run 200 kilometers to achieve the most braking effect, as far as possible to the road to a good car less local running-in. The new brake disc running-in method is to use the points of braking to brake, do not break before the use of the brakes. Prone to accidents.

1, light on the brakes to moderate power braking speed to about 10-20 km/h. There is no need to stare at the speedometer, just keep your eyes on the road and make sure you notice the road.

2, loosen the brake to drive a few kilometers to make the brake pad temperature slightly cooler. But can not brake to the vehicle stop, otherwise brake pad material into the brake disc, Brake Pad will cause brake vibration.

3, repeat at least 10 brake cycles

Brake pads must choose the normal factory products, poor brake pads will not only affect the braking effect, but also on the brake disc damage. If you replace the brake pads in the repair shop, you need to be very careful! In the car brake pad price allowed, or choose a well-known brand is more reliable.