[Catalog:News] [Date:2021-5-21] [Hits:] [Return]

1. Maybe the brake pipe has air intake. I suggest you go to the 4S store to have a check, which will be more reassuring. 2. The performance of the new brake pads is relatively smooth. It will feel soft when you step on the brake. It takes a period of time to adapt. This situation is normal. Therefore, it is suggested that if you find that there is a problem of brake softening, you should go to the 4S store to check what kind of cause it is, so that you can feel more at ease. It also reminds us to drive more carefully after changing the brake pads.

The brake pad of a vehicle is a very important component. We all know that the tire is the only contact between the vehicle and the ground, and the brake pad is an accessory that controls the speed of the tire. The brake pads need to accurately complete our braking instructions. In case of problems, the brake will not stop, and the consequences are very serious. The brake pad has a life cycle. When it reaches the life cycle or the trip computer detects that the brake wear exceeds the design value, the brake pad needs to be replaced.

We suggest to replace the original parts of the original factory. Such brake pads can be better compatible with our vehicles. After all, the design of the manufacturer in this aspect is also fully matched. After changing the brake pads, people will feel that they are not so comfortable to drive. They may feel that the brakes are insufficient and soft. If there is a problem, you need to check if there is a problem with the lower brake system, so it is recommended to replace it at a regular 4S shop. So what are the main problems.

New brake pad design reason

The new brake pads are not run in and it is difficult to brake in place when driving. This is because the performance of the brake pad is relatively smooth, and the contact surface between the brake disc will be smaller, so it needs more strong braking to have the same braking effect. After the running in period, this situation will be better improved. If there is still any problem, it is suggested to check the brake system comprehensively to see where the problem is.

Brake pipe intake

When the air intake problem occurs in the brake oil pipe assembly of the brake system, the pressure inside will also be reduced, and the brake will naturally feel powerless. In this case, the problem can only be solved by exhausting the internal air, which needs to be dealt with professionally in the 4S shop. In the whole braking process, the brake fluid will transfer the squeeze force, and eventually increase the friction between the brake pad and the brake disc, so as to reduce the vehicle speed.

Running in period of brake pad

There will be a mileage running in period for new brake pads. During this period, the brake will be soft. At the 4S store, the technicians change the brake pads and drive them for a test run. Will take a more aggressive way to brake vigorously, so that the running in period will pass faster. Of course, we are not as professional as their technicians. We need to brake several times during driving to make it work faster. The running in period is usually 200 km. After the running in period, the problem of soft brake will be improved a lot.

After changing the brake pads, the feeling of driving will be different from that of not changing them. You need to adapt yourself. After all, there are differences between the new brake system and the one worn to the end of its service life. After adapting to this difference, it will be easier to drive. In a word, after changing the brake pads, it is no problem to reserve more advance for the brake.