[Catalog:News] [Date:2017-6-12] [Hits:] [Return]

Brake plate accessories generally by the steel plate, then the insulation layer and friction block, which is composed of non-heat transfer material, the purpose of insulation. The friction block is composed of friction material, adhesive, brake is squeezed in the brake disc or brake drum on the friction, Accessories Of Brake Pad so as to achieve the purpose of vehicle deceleration brake. Due to friction, the friction block will gradually be worn, in general, the lower the cost of the brake pads wear faster. After the use of friction material to replace the brake pads, Accessories Of Brake Pad or steel plate and brake disc will be in direct contact, and ultimately lose the braking effect and damage the brake disc.

This is actually an early wear phenomenon, causing this early wear causes are the following aspects:

1. Poor brake disc or drum material and structure is likely to cause early wear of brake pads.

2. The original car brake design area is small, in the long-term speeding, Accessories Of Brake Pad frequent braking, overload and long-term use of high temperature, but also cause serious wear and tear of the main reasons.

3. As the brake system of the long-term use of brake calipers caused by the brake does not return, making the film and the long-term dragging wear and tear caused by serious wear and tear.

4. brake pads used by the material and brake pads friction layer design density is unreasonable (too small), Accessories Of Brake Pad but also cause serious wear and tear of the brake one of the reasons.

Brake pad accessories of the three major advantages introduced

The above aspects are the performance factors provided by the car brake accessories. First, look at the friction coefficient, the friction coefficient determines the basic brake pads braking torque, too high will cause the brake during the wheel lock, the direction of out of control and burning, Accessories Of Brake Pad too low the braking distance is too long;

First, look at life, usually brake pads can guarantee 30,000 km of life.

Second, depends on the safety of brake pads in the brake will produce instantaneous high temperature, especially in high-speed or emergency braking, high temperature state, the friction coefficient of friction plate will decline;

Third, to see whether comfortable, including the brake feel, noise, dust, smoke, smell, etc., is a direct manifestation of friction performance;