The Maintenance Of The Brake Pads Is Very Important
That brake pads, that is, from the role of the brake. In the car's braking system, the brake pads are the most critical safety parts, all the braking effect is good or bad brake pads play a decisive role, so that good brake pads are the protection of God and the car.
The brake pads are usually made of steel plate, adhesive insulation layer and friction block. The steel plate is painted to rust, and the coating process is used to check the temperature distribution of the coating process with SMT-4 furnace temperature tester to ensure the quality. Brake Pad The insulation layer is composed of non-heat transfer material, the purpose is to heat. The friction block is composed of friction material, adhesive, brake is squeezed in the brake disc or brake drum on the friction, so as to achieve the purpose of vehicle deceleration brake. Due to friction, the friction block will gradually be worn, in general, Brake Pad the lower the cost of the brake pads wear faster.
Brake is one of the important parts of car driving safety, but also to protect the safety of the driver parts. If the brake failure will bring us serious traffic safety, Brake Pad so do not look down on the daily brake system inspection and maintenance. Although it is only a small piece of brake pads, if the brake system failure due to traffic accidents, whether for our lives or property will be a serious loss.
Brake pads are important braking parts of the car and an important part of the safety of the driver. The main working principle of the brake pads is friction. Brake pads are not disc brakes and drums, the material generally includes resin brake pads, powder metallurgy brake pads, Brake Pad carbon composite brake pads, ceramic brake pads several.
The role and principle of brake pads
Brake pads As the name suggests, is to help the vehicle brake brake parts. Brake is to ensure the normal driving vehicles to protect the safety of passengers the key to personal safety. So the quality of the brake pads is good or bad, as well as the maintenance of the brake pads is very important, Brake Pad if found that the problem requires timely repair.
The principle of the brake pad is simple to no longer simple friction, but the ordinary foot pedal until the vehicle brake, the whole process of braking is extremely complex. A good brake system needs to provide adequate, stable braking force, and good hydraulic transmission and cooling capacity.
Classification of brake pads
Brake discs are divided into disc brakes and drum brakes from the braking method. The drum brake is used for large vehicles because of the low cost. The disc brake is used for general cars. From the material is divided into resin brake pads, powder metallurgy brake pads, carbon brake pads, ceramic brakes several.
Brake pads replacement and maintenance
Brake pads in the use of continuous loss, Brake Pad under normal circumstances the front wheel brake pads will wear faster. Usually every 5000 km or 7500 km to do maintenance, to check the brake pads, check the remaining thickness, wear status, return is comfortable, etc., if found abnormal should be timely maintenance. Brake pads must not wait until the mill finished to replace, wear to half should be replaced.