Braking system
Braking system is one of the important parts of automobile safety performance.All equipment shall be checked from time to time to ensure the proper operation of the braking system and to ensure safe driving.The following points should be paid attention to in daily inspection:
1. Under normal driving conditions, check the brake shoes every 5000 kilometers, not only to check the remaining thickness, but also to check the wear state of the shoes;
2. After changing the shoe, be sure to step on the brake to eliminate the gap between the shoe and the brake disc, resulting in the failure of the first foot to brake, which is prone to accidents;
3. After replacing the brake shoe, it must run 200 km to achieve the best braking effect.Freshly changed shoes must be driven carefully.
Three tips for self-checking car brakes:
1. The thickness
Click here for a larger image
The new brake pads are about 1.5 cm thic
A brake system includes a master cylinder, a slave cylinder and a wheel cylinder for braking a wheel. The master cylinder and the slave cylinder are connected via a first and a second fluid passage. A shutoff valve is provided in the first fluid passage. The first fluid passage communicates with the slave cylinder at a position in front of an advance limit of a cup seal of a piston of the slave cylinder. The second fluid passage branches from the first fluid passage on a side of the master cylinder relative to the shutoff valve. When the shutoff valve is closed, stroke loss is automatically minimized from the time the piston starts to advance to the time brake fluid pressure is generated.
