[Catalog:News] [Date:2020-4-1] [Hits:] [Return]

Brake pads are also called brake pads. In the car's braking system, the brake pads are the most critical safety parts, all the braking effect is good or bad brake pads play a decisive role, so that good brake pads are the protection of God and the car.

Brake pads are the main components of the safe operation of the car, but the new brake pads are running for some time, there will always be a variety of problems. Brake Pad Then we need to replace the brake pads, today Xiaobian to share the brake pads must pay attention to the matter:

1. First of all to check whether the brake pads are pure parts, Brake Pad product packaging integrity, security signs and packaging logo and brake pads on the logo is consistent, whether the product model and the contents of the certificate match.

2. Before lifting the vehicle, the cover should be opened in front of the brake oil, Brake Pad and the tire screw should be loosened. If you use a simple jack support, the jack should be good support, and reinforcement does not replace the brake pads of the wheels. Remove the tires, Brake Pad loosen the clamps and tighten the screws, and check the screws, clamp the guide rod, remove the above sediment and oil, and on the oil maintenance.

3. Remove the old brake pads, check the degree of wear of the brake disc, whether the trench from the bad. Serious wear and tear should replace the new brake disc, the cycle of 8-12 million km, otherwise it will speed up the replacement of the new brake pads wear, Brake Pad and the direction of braking jitter, the braking force school.

Tips: the installation of new brake pads should be clear inside and outside, the friction surface of the brake pads should be to the brake disc, so that the disc with the appropriate. Good accessories, Brake Pad fastening clamp body. Before fastening the tongs, apply the tool to push the plunger back into place to allow the clamp to fit in place. If you need to replace the brake pads on the drum brakes recommended to the professional maintenance plant to professional operations, so as to avoid errors.

4. The tire should be reset after the brake is installed. When installing the tire screws, the corner should be tightened, which is conducive to the protection of tires and brake wheels. At the same time, Brake Pad but also check the tread and edge of the wear and tear is normal, the best left and right wheels can be replaced regularly, this will help extend the tire life. 5. Finally, you also need to check the brake fluid. Brake fluid should be regularly replaced, add, and should ensure that the brake fluid used in the brand and the original brake fluid grades consistent, Brake Pad this will help clear the brake pipe sludge dirt, the brake is more sensitive. If the different brands of brake fluid mixed use, will be a chemical change, resulting in sludge and inorganic salt deposition in the braking system, over time, will block the pipeline, resulting in brake failure, the consequences can not imagine.

Brake piece classification knowledge:

From the material can be divided into:

1. Resin based brake material

2. Carbon / carbon composite brake material

Powder metallurgy brake material

4. Ceramic-based brake material

Types can be divided into:

1. Brake pads for disc brakes

2. Brake shoe for drum brakes

3. for the big truck to make the film